Multistrada 950

Please login or register.

News: A big welcome to all new members !


Author [ES] [MY] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Worrisome wear  (Read 1759 times)

0 Members and 1 Guest are viewing this topic.

Offline Desmofonso

  • MTS 950 Member
  • **
  • Posts: 17
  • Country: es
Worrisome wear
« on: October 09, 2019, 06:00:40 PM »
Hi there friends

Checking my bike I found some attrition points.
1.- On the oil hose, from the radiator to the engine's bottom. The pipe touches the water radiator and abrades the plastic cover, even it scratches the metal web  :012: This was solved reorienting the pipes in the engine side, to get some extra milimeters and avoid this issue. I softened the water radiator edge too.
2.- On the exhaust valve steel wire. The frame touches the wire, and abrades the wire's cover  :182: Not solved yet (just put a plastic tape) but in my opinion, bending the support spring to divert the wire from the frame will be enough.

Please, see the pictures attached.

Offline Goldstar

  • MTS 950 Pro
  • ***
  • Posts: 144
  • Bike: MTS 950 & 797+
  • Town / City: Norfolk
  • Country: gb
Re: Worrisome wear
« Reply #1 on: October 09, 2019, 06:16:23 PM »
I had this problem soon after I got the bike, pipe replaced under warranty....

https://www.multistrada950.com/forum/index.php/topic,329.msg2042.html#msg2042

Offline neilb

  • MTS 950 Master
  • ****
  • Posts: 846
  • Bike: MTS 950 Red
  • Town / City: Billericay, Essex
  • Country: gb
Re: Worrisome wear
« Reply #2 on: October 09, 2019, 10:43:33 PM »
The other wear point to look out for is the front brake hoses touching the front mudguard didnt rubbing through the plastic outer sleeve. They are braided steel underneath so no real damage will be done. I simply wrapped some black plastic insulating tape around the hoses at these points.

Offline Conman

  • MTS 950 Pro
  • ***
  • Posts: 482
  • Town / City: Stockport
  • Country: gb
Re: Worrisome wear
« Reply #3 on: October 14, 2019, 02:24:22 PM »
The exhaust flapper valve control wire did snap on mine. Never found a reason but this is a good candidate.
Anything more than two wheels is unnecessary.

Offline Desmofonso

  • MTS 950 Member
  • **
  • Posts: 17
  • Country: es
Re: Worrisome wear
« Reply #4 on: March 23, 2020, 03:08:11 PM »
*Originally Posted by neilb [+]
The other wear point to look out for is the front brake hoses touching the front mudguard didnt rubbing through the plastic outer sleeve. They are braided steel underneath so no real damage will be done. I simply wrapped some black plastic insulating tape around the hoses at these points.

An alternative coating for the brake hoses, and many other appications. I use the Kintsglue from Loctite. This protuct has a chewing gum-like consistency when open the envelope. When it dries it's like hard rubber, but flexible.