Multistrada 950

Please login or register.

News: A big welcome to all new members !


Author [ES] [MY] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Installing Cobrra Nemo 2 chain oiler  (Read 1055 times)

0 Members and 1 Guest are viewing this topic.

Offline ZiggyCol

  • MTS 950 Pro
  • ***
  • Posts: 196
  • Bike: MTS 950 (Red)
  • Town / City: Harrogate
  • Country: gb
Installing Cobrra Nemo 2 chain oiler
« on: December 15, 2018, 03:55:39 PM »
Got around to installing this today. First decision was where to locate the reservoir. I didn't want it on the handlebars but wanted it neatly located but accessible to operate on the move if necessary. So decided to mount on nearside here - arrow indicates the bolt position I'll use . . .



Only it needs a longer bolt and spacer - see original and replacement . . .



Here is the reservoir mounted . . .



I wanted feeder tube routing to be as neat and secure as possible. This photo shows a channel cut into the under swingarm chain guide which provides a good method of securing . . .



Tube entry to the swingarm secured with a simple tube clip . . .



And another used under the swingarm . . .



And finnaly the dripper itself attached with a couple of cable ties . . .



All in all pleased with the result.

Life is not a rehearsal . . .

Offline BabyD

  • MTS 950 Master
  • ****
  • Posts: 606
  • Bike: Multi 1260s
  • Town / City: Buckinghamshire
  • Country: gb
Re: Installing Cobrra Nemo 2 chain oiler
« Reply #1 on: December 15, 2018, 10:15:30 PM »
Wait until them sticky clips get dirty, they become non sticky very quickly especially on the textured surface
If I had a second brain cell it would be so lonely......

Offline buzzardbilly

  • MTS 950 Pro
  • ***
  • Posts: 259
  • Town / City: Gloucester
  • Country: gb
Re: Installing Cobrra Nemo 2 chain oiler
« Reply #2 on: December 16, 2018, 07:59:52 AM »
+ 1 on BabyD's comment  - my "sticky bits" came off real quick on that swing arm surface and I had to revert to a cable tie alternative

Offline ZiggyCol

  • MTS 950 Pro
  • ***
  • Posts: 196
  • Bike: MTS 950 (Red)
  • Town / City: Harrogate
  • Country: gb
Re: Installing Cobrra Nemo 2 chain oiler
« Reply #3 on: December 16, 2018, 11:57:13 AM »
Fortunately the two cable clips I've used are not essential to the security of the tubing, they are cosmetic as much as anything. The tubing is well located by 3 secure attachment points - the cable tied dripper, the under swingarm chain guard and a cable tie on the frame at the front end of the swing arm. I'll obviously keep a close eye on things initially.
Life is not a rehearsal . . .