Author Topic: CNC Racing gear lever problem  (Read 1028 times)

0 Members and 1 Guest are viewing this topic.

  • Offline DanLop   pl

    • MTS 950 Member  ‐    20
    • **
    • Topic Author

    Offline DanLop

    • MTS 950 Member
    • **
    • Topic Author
    • Posts: 20
    • Country: pl
    CNC Racing gear lever problem
    on: December 26, 2020, 08:12:24 pm
    December 26, 2020, 08:12:24 pm
    Hello,
    guys could you share your opinion - is it a real problem, or not?
    I bought cnc-racing levers and the one for gears has shifted mounting point (by 2cm), this finally makes the qs rod bend or positioned at some angle.
    should I return it?




  • Offline Conman   gb

    • MTS 950 Pro  ‐    496
    • ***
      #1

    Offline Conman

    • MTS 950 Pro
    • ***
    • Posts: 496
    • Town / City: Stockport
    • Country: gb
    Re: CNC Racing gear lever problem
    Reply #1 on: January 04, 2021, 11:04:34 am
    January 04, 2021, 11:04:34 am
    Personally, I would work on the idea "if it doesn't look right, it probably isn't" and that does not look right to me  :155:
    Anything more than two wheels is unnecessary.

  • Offline DanLop   pl

    • MTS 950 Member  ‐    20
    • **
    • Topic Author
    • #2

    Offline DanLop

    • MTS 950 Member
    • **
    • Topic Author
    • Posts: 20
    • Country: pl
    Re: CNC Racing gear lever problem
    Reply #2 on: January 05, 2021, 10:16:37 am
    January 05, 2021, 10:16:37 am
    and I think the same..
    I asked CNC about their opinion on this issue and got the answer saying "we will check it when time allows"..
    so I took things in hands and found a longer screw plus nylon sleeve (as distance) and finally I got this result:






    imho it looks quite clean and works as (it should be) designed.

    and I'm rather happy with the final effect












     



    rage-intracellular