Author Topic: Looking to fit R&G crash bungs.  (Read 1671 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Ducmul   gb

    • MTS 950 Member  ‐    28
    • **

    Offline Ducmul

    • MTS 950 Member
    • **
    • Posts: 28
    • Country: gb
    • Town / City: Abertillery
    Looking to fit R&G crash bungs.
    on: January 28, 2021, 02:50:08 pm
    January 28, 2021, 02:50:08 pm
    Hi everyone, looking to fit crash bungs, should hopefully be easy enough. Any tips on fitting, torque settings etc; would be gratefully appreciated.

  • Offline Robbie rider   gb

    • MTS 950 Member  ‐    25
    • **
      #1

    Offline Robbie rider

    • MTS 950 Member
    • **
    • Posts: 25
    • Country: gb
    • Bike: Multistrada 950
    • Town / City: NOTTINGHAM
    Re: Looking to fit R&G crash bungs.
    Reply #1 on: March 01, 2021, 10:58:24 am
    March 01, 2021, 10:58:24 am
    I've bought them, will let you know when it comes to fitting - not had a chance to to fit so far...

  • Offline Ducmul   gb

    • MTS 950 Member  ‐    28
    • **
      #2

    Offline Ducmul

    • MTS 950 Member
    • **
    • Posts: 28
    • Country: gb
    • Town / City: Abertillery
    Re: Looking to fit R&G crash bungs.
    Reply #2 on: March 01, 2021, 12:52:50 pm
    March 01, 2021, 12:52:50 pm
    Ok, thanks for that Rob, much appreciated.

  • Offline EftanD   gb

    • MTS 950 Member  ‐    58
    • **
      #3

    Offline EftanD

    • MTS 950 Member
    • **
    • Posts: 58
    • Country: gb
    • Bike: Multistrada 950
    • Town / City: Burnley
    Re: Looking to fit R&G crash bungs.
    Reply #3 on: March 11, 2021, 01:54:59 pm
    March 11, 2021, 01:54:59 pm
    How did it go?

  • Offline Ducmul   gb

    • MTS 950 Member  ‐    28
    • **
      #4

    Offline Ducmul

    • MTS 950 Member
    • **
    • Posts: 28
    • Country: gb
    • Town / City: Abertillery
    Re: Looking to fit R&G crash bungs.
    Reply #4 on: March 11, 2021, 05:02:44 pm
    March 11, 2021, 05:02:44 pm
    Hi, still havenít had a chance to fit mine yet. Did fit a short dark tint Puig screen, looks nice over the original. Did this with my other three Multiís.
    Whilst fitting screen decided to start bike, however refused to start, flattening battery in process, also ignition would not turn off for some reason.....very strange??  Anyone with any ideas, or have encountered  similar issues. Ps. Sorry should have submitted this issue under a new topic. 😕

  • Offline Robbie rider   gb

    • MTS 950 Member  ‐    25
    • **
      #5

    Offline Robbie rider

    • MTS 950 Member
    • **
    • Posts: 25
    • Country: gb
    • Bike: Multistrada 950
    • Town / City: NOTTINGHAM
    Re: Looking to fit R&G crash bungs.
    Reply #5 on: March 11, 2021, 06:00:10 pm
    March 11, 2021, 06:00:10 pm
    Hi,

    Fitted R&G bungs, Evotech oil and rad guards, engine cover, ET sliders and bar protectors at Nottingham Ducati - all in £117.00 perfect fit. Hope that helps.

  • Offline mose40   gb

    • MTS 950 Member  ‐    47
    • **
      #6

    Offline mose40

    • MTS 950 Member
    • **
    • Posts: 47
    • Country: gb
    • Bike: 950s
    • Town / City: Midlands
    Re: Looking to fit R&G crash bungs.
    Reply #6 on: March 11, 2021, 07:19:39 pm
    March 11, 2021, 07:19:39 pm
    Hey Robbie
    Assuming that is labour cost only ?

  • Offline Robbie rider   gb

    • MTS 950 Member  ‐    25
    • **
      #7

    Offline Robbie rider

    • MTS 950 Member
    • **
    • Posts: 25
    • Country: gb
    • Bike: Multistrada 950
    • Town / City: NOTTINGHAM
    Re: Looking to fit R&G crash bungs.
    Reply #7 on: March 12, 2021, 11:33:08 am
    March 12, 2021, 11:33:08 am
    yes.

  • Offline Robbie rider   gb

    • MTS 950 Member  ‐    25
    • **
      #8

    Offline Robbie rider

    • MTS 950 Member
    • **
    • Posts: 25
    • Country: gb
    • Bike: Multistrada 950
    • Town / City: NOTTINGHAM
    Re: Looking to fit R&G crash bungs.
    Reply #8 on: March 12, 2021, 11:34:59 am
    March 12, 2021, 11:34:59 am
    I was going to fit it myself, But taking the front panels off- didn't fancy messing it up  :002:

  • Offline Paul_Smith   ie

    • MTS 950 Member  ‐    61
    • **
      #9

    Offline Paul_Smith

    • MTS 950 Member
    • **
    • Posts: 61
    • Country: ie
    • Bike: Versys 1000
    • Town / City: Roscommon
    Re: Looking to fit R&G crash bungs.
    Reply #9 on: March 12, 2021, 11:44:31 pm
    March 12, 2021, 11:44:31 pm
    *Originally Posted by Ducmul [+]
    Hi, still havenít had a chance to fit mine yet. Did fit a short dark tint Puig screen, looks nice over the original. Did this with my other three Multiís.
    Whilst fitting screen decided to start bike, however refused to start, flattening battery in process, also ignition would not turn off for some reason.....very strange??  Anyone with any ideas, or have encountered  similar issues. Ps. Sorry should have submitted this issue under a new topic. 😕

    What had you changed before you tried to start the bike?