Pages: 1   Go Down

Author Removing clutch cover  (Read 485 times)

0 Members and 1 Guest are viewing this topic.

    • Offline ahdoman   us

    • MTS 950 Junior  ‐    6
    • *

    Offline ahdoman

    • MTS 950 Junior
    • *
    • Posts: 6
    • Country: us
    • Town / City: Bakersfield
    Removing clutch cover
    on: January 16, 2022, 07:33:36 pm
    January 16, 2022, 07:33:36 pm
    Has anyone on here removed the clutch cover? I’ve removed all of the bolts and the cable connector. I can’t get this this to budge. Even prying on the tabs does nothing.
    Logged

    • Offline Paul_Smith   ie

      #1

    Offline Paul_Smith

    • MTS 950 Pro
    • ***
    • Posts: 102
    • Country: ie
    • Bike: Versys 1000
    • Town / City: Roscommon
    Re: Removing clutch cover
    Reply #1 on: January 16, 2022, 08:26:08 pm
    January 16, 2022, 08:26:08 pm
    It is stuck to the gasket. A few firm taps with a rubber mallet will shift it.
    Logged

    • Offline Bordenrider   ca

    • MTS 950 Member  ‐    26
    • **
      #2

    Offline Bordenrider

    • MTS 950 Member
    • **
    • Posts: 26
    • Country: ca
    • Town / City: Borden, Saskatchewan
    Re: Removing clutch cover
    Reply #2 on: February 03, 2022, 11:13:16 pm
    February 03, 2022, 11:13:16 pm
    yes rubber mallet, if you dont have one use a piece wood and tap on it with regular hammer. So, why are you looking at the clutch?
    Logged

    • Offline Paul_Smith   ie

      #3

    Offline Paul_Smith

    • MTS 950 Pro
    • ***
    • Posts: 102
    • Country: ie
    • Bike: Versys 1000
    • Town / City: Roscommon
    Re: Removing clutch cover
    Reply #3 on: February 06, 2022, 09:31:06 pm
    February 06, 2022, 09:31:06 pm
    If you don't have a rubber mallet you probably should not be trying to remove your clutch cover. What is the problem you are trying to solve?
    Logged
    Pages: 1   

    Go Up

     


    Recent Topics