Author Topic: Skene P3 Wiring  (Read 2114 times)

0 Members and 1 Guest are viewing this topic.

  • Offline DOR55   us

    • MTS 950 Member  ‐    33
    • **
    • Topic Author

    Offline DOR55

    • MTS 950 Member
    • **
    • Topic Author
    • Posts: 33
    • Town / City: WDM, IA
    • Country: us
    Skene P3 Wiring
    on: March 25, 2022, 03:07:45 am
    March 25, 2022, 03:07:45 am
    Am installing Skene P3's on my 2017 MS950 (the basic tail/brake light model without turn signal and decelerometer).  Have them on other bikes and believe it is one of the best investments.

    Questions for those of you who have them:

    - Where did you place the IQ-260 Controller?  Not enough room in the small area above the license plate where the turn signal/brake/tail light connectors are.

    - What wire did you tap for the switched line?

    Thanks in advance!

  • Offline DOR55   us

    • MTS 950 Member  ‐    33
    • **
    • Topic Author
    • #1

    Offline DOR55

    • MTS 950 Member
    • **
    • Topic Author
    • Posts: 33
    • Town / City: WDM, IA
    • Country: us
    Re: Skene P3 Wiring
    Reply #1 on: July 28, 2023, 12:50:29 pm
    July 28, 2023, 12:50:29 pm
    Here's the final install for anyone who might be interested.  Light modules are placed above license plate due to side reflectors blocking regular vertical side-of license plate mounting.