I’m just purchasing a 950 S and very interested in the possibility of lowering as I have a short inseam. When I asked the dealer he suggested that it was possible using the V2 kit but was around 7 hours labour, would need reprogramming of the suspension control and wouldn’t see any change out of a £1000. Based on that I did some research and found the V2 kit on the configuration which includes a link to the installation manual. The manual states 3 hours installation and no reprogramming of the suspension control. I then went online to one of the Ducati parts suppliers and all the relevant components are exactly the same on each of the 950S and V2 for the mating parts so in my opinion will 100% fit.