Author Topic: Brake and abs light  (Read 1663 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Joe   ca

    • MTS 950 Member  ‐    32
    • **

    Offline Joe

    • MTS 950 Member
    • **
    • Posts: 32
    • Country: ca
    • Bike: MTS 950
    • Town / City: Mississauga
    Brake and abs light
    on: April 27, 2018, 01:14:06 pm
    April 27, 2018, 01:14:06 pm
    Hello everyone. I have a brake and abs warning light that blinks slowly until I set off then it stops. I cant find a list of warning lights in my manual and I can't remember if this is normal because I just brought her out and it's been a long winter this year. Braking seems fine, Is this normal? Thanks.

  • Offline thenozzle   gb

      #1

    Offline thenozzle

    • MTS 950 Master
    • ****
    • Posts: 854
    • Country: gb
    • Town / City: Cheshunt / Herts
    Re: Brake and abs light
    Reply #1 on: April 27, 2018, 01:21:10 pm
    April 27, 2018, 01:21:10 pm
    Joe look at manual page 33

  • Offline Conman   gb

      #2

    Offline Conman

    • MTS 950 Pro
    • ***
    • Posts: 486
    • Country: gb
    • Town / City: Stockport
    Re: Brake and abs light
    Reply #2 on: April 27, 2018, 03:20:44 pm
    April 27, 2018, 03:20:44 pm
    That's normal, it's waiting for you to set off so it can compare the rotation speed of the front and back wheel (calibration). Once that's sorted the lights go off. If there is any change in the relationship as you brake the bike knows one wheel is slipping so it lets it off.
    Anything more than two wheels is unnecessary.

  • Offline Joe   ca

    • MTS 950 Member  ‐    32
    • **
      #3

    Offline Joe

    • MTS 950 Member
    • **
    • Posts: 32
    • Country: ca
    • Bike: MTS 950
    • Town / City: Mississauga
    Re: Brake and abs light
    Reply #3 on: April 27, 2018, 04:36:14 pm
    April 27, 2018, 04:36:14 pm
    Thanks again for the help. Much appreciated.