Author Topic: Auto signal canceling  (Read 2405 times)

0 Members and 1 Guest are viewing this topic.

  • Offline resovoir   gb

    • MTS 950 Pro  ‐    125
    • ***
    • Topic Author

    Offline resovoir

    • MTS 950 Pro
    • ***
    • Topic Author
    • Posts: 125
    • Town / City: Near Portsmouth
    • Country: gb
    Auto signal canceling
    on: July 25, 2018, 03:51:15 pm
    July 25, 2018, 03:51:15 pm
    Hi
    The multi will auto signal cancel after 500 metres. I consider this to be too long a distance. As the cancel is based on distance I assume the signal to cancel comes from the speed sensor or abs? Has anyone any knowledge if it is possible to reduce this distance or is it a totally new eprom or ecu? Just wondering
    Cheers
    Resovoir

  • Offline Dave G   gb

    • MTS 950 Pro  ‐    378
    • ***
      #1

    Offline Dave G

    • MTS 950 Pro
    • ***
    • Posts: 378
    • Bike: MTS950
    • Town / City: Nantwich
    • Country: gb
    Re: Auto signal canceling
    Reply #1 on: July 26, 2018, 12:27:26 pm
    July 26, 2018, 12:27:26 pm
    Its a good idea to have this feature but it shouldn't be relied upon.
    It only works at low speed. I tested it once and too found it to be too long of a distance before they turn off. I haven't used it since.

    If this system is designed it should be at any speed to work when you turn onto a fast road.
    The long distance is maybe to allow for you to turn off a road before they cut out before you turn.