Multistrada 950 Photos

Author Topic: Frame end caps  (Read 1734 times)

0 Members and 1 Guest are viewing this topic.

Offline buzzardbilly   gb

Offline buzzardbilly

  • MTS 950 Pro
  • ***
  • Posts: 268
  • Country: gb
  • Town / City: Gloucester
Frame end caps
on: November 26, 2018, 07:13:30 pm
November 26, 2018, 07:13:30 pm
Does anybody know if the Pyramid Plastics frame end caps for the 1200 fit the 950 - I am guessing they do

Offline neilb   gb

    #1

Offline neilb

  • MTS 950 Master
  • ****
  • Posts: 847
  • Country: gb
  • Bike: MTS 950 Red
  • Town / City: Billericay, Essex
Re: Frame end caps
Reply #1 on: November 26, 2018, 09:20:58 pm
November 26, 2018, 09:20:58 pm
I couldn’t say. I filled the holes with black rubber ferrules bought from the bay of e for about a fiver for a bag of twelve. Do the job just fine.

  • Offline Murf46   gb

      #2

    Offline Murf46

    • MTS 950 God
    • *****
    • Posts: 1099
    • Country: gb
    • Town / City: newcastle upon tyne
    Re: Frame end caps
    Reply #2 on: November 26, 2018, 11:09:43 pm
    November 26, 2018, 11:09:43 pm
    *Originally Posted by neilb [+]
    I couldn’t say. I filled the holes with black rubber ferrules bought from the bay of e for about a fiver for a bag of twelve. Do the job just fine.
    [/quote

    That's what I done.... simple and it works
    Red or dead

    Offline buzzardbilly   gb

      #3

    Offline buzzardbilly

    • MTS 950 Pro
    • ***
    • Posts: 268
    • Country: gb
    • Town / City: Gloucester
    Re: Frame end caps
    Reply #3 on: November 27, 2018, 08:34:38 am
    November 27, 2018, 08:34:38 am
    Thanks guys for the tip - a lot cheaper than a £24 Pyramid solution. Do you have any guide  as to which black ferrules to look for on e Bay as there seem to be loads on there

    Offline neilb   gb

      #4

    Offline neilb

    • MTS 950 Master
    • ****
    • Posts: 847
    • Country: gb
    • Bike: MTS 950 Red
    • Town / City: Billericay, Essex
    Re: Frame end caps
    Reply #4 on: November 27, 2018, 10:12:16 am
    November 27, 2018, 10:12:16 am
    *Originally Posted by buzzardbilly [+]
    Thanks guys for the tip - a lot cheaper than a £24 Pyramid solution. Do you have any guide  as to which black ferrules to look for on e Bay as there seem to be loads on there

    I think they’re all pretty much the same. Just make sure you get the correct diameter ones.....out with the measuring stick as I can’t remember. A smidgeon of grease  and they slide in nicely (as the actress said to the bishop)

    Offline buzzardbilly   gb

      #5

    Offline buzzardbilly

    • MTS 950 Pro
    • ***
    • Posts: 268
    • Country: gb
    • Town / City: Gloucester
    Re: Frame end caps
    Reply #5 on: November 27, 2018, 01:30:20 pm
    November 27, 2018, 01:30:20 pm
    Thanks  neilb  - managed to  see some that look right - just need to stick something in the hole to get the measurement !

  • Offline BabyD   gb

      #6

    Offline BabyD

    • MTS 950 Master
    • ****
    • Posts: 624
    • Country: gb
    • Bike: Multi 1260s
    • Town / City: Buckinghamshire
    Re: Frame end caps
    Reply #6 on: November 27, 2018, 04:26:17 pm
    November 27, 2018, 04:26:17 pm
    *Originally Posted by buzzardbilly [+]
    Thanks  neilb  - managed to  see some that look right - just need to stick something in the hole to get the measurement !

    If there was ever a leading statement, that was it  :745:
    If I had a second brain cell it would be so lonely......

  • Offline Murf46   gb

      #7

    Offline Murf46

    • MTS 950 God
    • *****
    • Posts: 1099
    • Country: gb
    • Town / City: newcastle upon tyne
    Re: Frame end caps
    Reply #7 on: November 27, 2018, 06:18:44 pm
    November 27, 2018, 06:18:44 pm
    I hope he means a finger  :745:
    Red or dead

     


    rage-intracellular