Author Topic: Gilles tooling levers and footpegs  (Read 1325 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Viobas   fr

    • MTS 950 Member  ‐    41
    • **

    Offline Viobas

    • MTS 950 Member
    • **
    • Posts: 41
    • Country: fr
    • Bike: MULTI 950
    • Town / City: Paris
    Gilles tooling levers and footpegs
    on: November 27, 2018, 10:43:30 pm
    November 27, 2018, 10:43:30 pm
    I installed brake and gear levers and touring footpegs from Gilles tooling. They're beautifully built and are huge improvements over stock.





  • Offline BabyD   gb

      #1

    Offline BabyD

    • MTS 950 Master
    • ****
    • Posts: 649
    • Country: gb
    • Bike: Multi 1260s
    • Town / City: Buckinghamshire
    Re: Gilles tooling levers and footpegs
    Reply #1 on: November 28, 2018, 07:14:44 am
    November 28, 2018, 07:14:44 am
    Please post a link to the items in case other want to buy
    If I had a second brain cell it would be so lonely......

  • Offline Viobas   fr

    • MTS 950 Member  ‐    41
    • **
      #2

    Offline Viobas

    • MTS 950 Member
    • **
    • Posts: 41
    • Country: fr
    • Bike: MULTI 950
    • Town / City: Paris
    Re: Gilles tooling levers and footpegs
    Reply #2 on: November 28, 2018, 07:30:36 am
    November 28, 2018, 07:30:36 am
    For the footpegs
    https://www.gillestooling.com/products/footcontrols/rgk2-turning-joints/2729/touring-foot-peg-set-driver-black?c=185

    And the small extension
    https://www.gillestooling.com/products/footcontrols/rgk2-turning-joints/1956/rgk2-color-kit

    For the levers:
    https://www.gillestooling.com/products/footcontrols/rct10gt-rearsets/1902/shift-and-brakelever-kit?c=185

    It's only advertised for the 1200 but it fits perfectly for the 950. Took a few months to receive the levers but I received the pegs within a week so you may want to check availabilities.

  • Offline Fabfor   it

    • MTS 950 Member  ‐    51
    • **
      #3

    Offline Fabfor

    • MTS 950 Member
    • **
    • Posts: 51
    • Country: it
    • Bike: MTS 950S Red
    • Town / City: Besozzo
    Re: Gilles tooling levers and footpegs
    Reply #3 on: November 28, 2018, 04:11:42 pm
    November 28, 2018, 04:11:42 pm
    Great job Viobas! :152:
    Don't you need rubber inserts on the footpeg to reduce vibration?
    Can you post a photo of the bike to see better the general effect?
    Thanks!

  • Offline Viobas   fr

    • MTS 950 Member  ‐    41
    • **
      #4

    Offline Viobas

    • MTS 950 Member
    • **
    • Posts: 41
    • Country: fr
    • Bike: MULTI 950
    • Town / City: Paris
    Re: Gilles tooling levers and footpegs
    Reply #4 on: November 28, 2018, 04:22:33 pm
    November 28, 2018, 04:22:33 pm
    They are sold with the rubber inserts but I preferred the grip without them. Didn't notice much more vibrations. I'll post a photo when I get on the bike again (when it stops raining 😢).

  • Offline Fabfor   it

    • MTS 950 Member  ‐    51
    • **
      #5

    Offline Fabfor

    • MTS 950 Member
    • **
    • Posts: 51
    • Country: it
    • Bike: MTS 950S Red
    • Town / City: Besozzo
    Re: Gilles tooling levers and footpegs
    Reply #5 on: November 28, 2018, 04:29:25 pm
    November 28, 2018, 04:29:25 pm
    Thanks a lot!
    Here the wheater is quite cold but sunny: please don't let clouds cross the Alps!  :001:

     


    rage-intracellular